KDS-3A microcomputer high-speed analyzer

1. Performance characteristics of KDS-3A microcomputer high-speed analyzer:

The microcomputer high-speed analyzer adopts dynamic tracking and nonlinear regression of the standard detection line, etc., directly reads the content, and automatically prints the results. Using single-chip microcomputer automatic tracking detection, it can store nine standard detection lines, and the power failure will not be affected. The standard detection line is automatically established, and the detection error is automatically judged to make the data accurate. A cold light source is used to stabilize the data.

2. Parameters of KDS-3A microcomputer high-speed analyzer:

Measuring range (in Mn, P, Si, Cr, Ni, Mo...) For example):

Mn：0.010-20.500%    P:0.005-1.000%

Cr：0.010～38.000%   Si:0.10-18.000%

Ni：0.010～48.000%   Mo:0.010-7.000% .......

(If the test method is changed, the types and content range of the measured elements can be expanded)

High measurement accuracy and short colorimetric time (approx. 3 seconds)