KD-TS2 furnace pre-furnace carbon silicon analyzer
The pre-furnace carbon-silicon analyzer is also known as the pre-furnace molten iron analyzer, the pre-furnace carbon-silicon composition analyzer, and the carbon-silicon equivalent instrument. When producing iron castings, it is necessary to select accurate chemical composition according to the wall thickness of the casting and casting conditions to achieve the required mechanical properties. KD-TS2 furnace pre-furnace carbon silicon analyzer, when other conditions are the same, carbon equivalent has a decisive influence on the metallographic structure, casting properties and mechanical properties of cast iron. In ductile iron production, only a precise determination of the carbon equivalent of the raw molten iron can provide data for the inoculation process.
Main parameters of KD-TS2 furnace front carbon silicon analyzer:
1. Measurement function: thermal analysis of white iron, gray cast iron and ductile iron.
2. Measurement parameters: determine the tensile strength Rm and hardness HB of molten iron by measuring CEL, C, Si, TL, TS, △T and △TM
3. The test results are digitally displayed and directly read, and CEL, C, Si, △T, △TM, tensile strength Rm, hardness HB, peak temperature Peak, liquid phase temperature TL, solid phase temperature TS, eutectic degree SC are automatically printed.
4. Temperature measurement range: 1250°C~1350°C
5. Accuracy: ≤±1°CCEL±0.047%C±0.039%Si±0.1%
6. Measuring range: C: 2.1~4.2%Si: 0~5.0%CEL: 2.5~5.0%
7. Display: 4-digit LED display, word height 50mm, resolution: 1°C
8. Working parameters: power supply AC220V, 50Hz; The power is 30W, and the ambient temperature is 0~50°C
9. Temperature compensation range: 0~15°C
10. Matching sample cup type: K type
11. Display temperature unit: Fahrenheit or Celsius can be set
12. Measurement time: 240 seconds (generally 1 minute 45 seconds)
13. Measurement status display: "Ready" green light, "Measure" yellow light, "Complete" red light display on the instrument
14. Operation mode: 9 buttons to select the required parameters, in which "Auto" displays CEL, C, SI, adjust the si content through the rotary potentiometer, and adjust the C content through the potentiometer.