Main features of KD-TS molten iron carbon silicon meter in front of furnace:
  It adopts anti-electromagnetic interference, dustproof, ultra-thin and portable design, which is easy to operate and can be operated by non-professionals. Through the improved evaluation method, it can automatically detect important metallurgical parameters, make up for the shortcomings of "spectrum" difficult to measure non-metallic elements (C, Si), and conventional analytical instruments can not meet the time requirements of rapid analysis before the furnace, and meet the quality control requirements of casting production.
 
Main technical parameters of KD-TS molten iron carbon silicon instrument in front of furnace:
1. Measurement function: thermal analysis of white iron, gray cast iron and ductile iron.
2. Measurement parameters: determine the tensile strength Rm and hardness HB of molten iron by measuring CEL, C, Si, TL, TS, △T, and △TM
3. Temperature measurement range: 1250°C~1350°C
4. Measuring range: C: 2.1~4.2% Si: 0~5.0% CEL: 2.5~5.0%
5. Accuracy: ≤±1°C CEL±0.047% C±0.05% Si±0.1%
6. Display: 4-digit LED display word height 50mm resolution: 1 °C
7. Operation mode: 9 buttons to select the required parameters, in which "Auto" cycles to display CEL, C, SI, and correct the C Si content by rotating the potentiometer.
8. Working parameters: power supply AC 220V, 50Hz; The power is 30W, and the ambient temperature is 0~50°C
9. Temperature compensation range: 0~15°C
10. Matching sample cup type: K type
11. Display temperature unit: Fahrenheit or Celsius can be set
12. Measurement time: 240 seconds (generally 1 minute 45 seconds)
13. Measurement status display: "Ready" green light, "Measure" yellow light, "Complete" red light on the instrument are displayed in a cyclic manner