KD-TS furnace pre-furnace molten iron analyzer

Key features:

It adopts anti-electromagnetic interference, dust insulation and portable design, which is easy to operate. There are a number of testing lines, according to different grades of molten iron and the actual situation of the molten iron in each factory, the appropriate testing line is selected, so that the detection is scientific and accurate. Through the improved evaluation method, it can automatically control important metallurgical parameters, make up for the shortcomings of the "spectrum" that cannot accurately measure non-metallic elements (C, Si), and the conventional analytical instruments can not meet the time requirements of pre-furnace analysis and the quality control requirements of casting production.

Main parameters of KD-TS furnace molten iron analyzer:

1. Measurement function: thermal analysis of white iron, gray cast iron and ductile iron.

2. Measurement parameters: determination of molten iron CEL, C, Si, TL, TS, △T, △TM

Determine the tensile strength Rm and hardness HB

3. Temperature measurement range: 1250°C~1350°C

4. Measuring range: C: 2.1~4.2% Si: 0~5.0% CEL: 2.5~5.0%

5. Accuracy: ≤±1°C CEL±0.047% C±0.05% Si±0.1%

6. Display: 4-digit LED display word height 50mm resolution: 1 °C

7. Operation mode: 9 buttons to select the required parameters, in which "Auto" displays CEL, C, SI, adjust the si content by rotating the potentiometer, and adjust the C content through the potentiometer.

8. Working parameters: power supply AC 220V, 50Hz; The power is 30W, and the ambient temperature is 0~50°C

9. Temperature compensation range: 0~15°C

10. Matching sample cup type: K type

11. Display temperature unit: Fahrenheit or Celsius can be set

12. Measurement time: 240 seconds (generally 1 minute 45 seconds)

13. Measurement status display: "Ready" green light, "Measure" yellow light, "Complete" red light display on the instrument